Ingenico Move 5000

Setting Up Your Terminal

To set up your terminal, you will need the technician password and the cashier password.

⚠️ If you do not have these passwords on hand, please contact your payment provider to request them (for Unzer, the technician password is typically 82024 and the cashier password is typically 22222).

First, press the F key repeatedly until the function code prompt appears. Enter the function code 513 and confirm.
Then enter the technician password (82024) and switch to OPI (Online Point of Interaction) operating mode. Confirm this selection.

Next, press the F key once and select "Settings." Enter the cashier password (22222), then select "Connections" and then "Cash Register (Inbound)." Select "TCP/IP" and then "Move Ethernet/WLAN." Set the TCP port to 20002 and press the red key repeatedly until the prompt to save the parameters appears. Save the parameters.

Then go back to "Connections" and this time select "Cash Register (Outbound)." Select "TCP/IP" and "Move Ethernet/WLAN" again, and set the TCP port to 20007. Press the red key repeatedly again until the prompt to save the parameters appears, and save the parameters.

Next, go back to "Connections" once more and select the "Dial-Up Assistant." Select "WLAN" and then your WLAN network. Enter the password, confirm DHCP with "Yes," and if prompted, select "No" for "Use X.25 Router." Save the changes.

Now press the "Stop" key to return to the main screen; the terminal will then restart automatically.

Finally, go to the Tillhub app and navigate to Settings > Terminals. Click "Add Terminal" in the top right corner, then select "OPI." Next, click on "Connection Required" and then on "Terminal IP Address." Select the displayed IP address and log in.